LED-CONN

LED-CONN is an extremely thin flat conductor, which consists of tinned and laminated copper strips. This product was developed primarily for optimal installation and supply of LED installations. Length, cable laying through tight passages and LED-profiles have no limits. It is possible to expose contact points in previously defined intervals. Connections can be made here with e.g. LED connectors offered by us. LED-CONN LIMITLESS is available with white or transparent insulation, with or without adhesive tape (3M™ - Quality) on the backside.

Tailored to individual lengths, this connector can be optimally used for feedthroughs and connections between two LED strips.

Package

• cut to length,
• From 25mm total length
• optional: with adhesive layer on the back
  

Advantages

• Easy installation
• No special tooling necessary
• Very flat profile for inconspicuous and exact installation
• Foldable, flexible and resistant

Characteristics standard design

• Width of cable: 8 mm
• Insulation thickness: 0,1 mm
• Width of edge: 0,45 mm
• Insulation resistance: min. 10 GΩ/km
• Rated voltage: 25 V
• Pitch:
  2-poles: 3,8 mm
  4-poles: 1,9 mm
  

• Width of conductor:
  2-poles: 3,3 mm²
  4-poles: 1,4 mm²
• Thickness of conductor : 0,1 mm
• Cross section:
  2-poles: 0,33 mm
  4-poles: 0,14 mm
• Current load see. VDE0891-1:
  2-poles: 6 A
  4-poles: 2 A
• Thickness of cable: 0,3 / 0,5* mm
• Conductor length: 25 - ... mm
  

* self-adhesive

Technical specifications (Accessories)

• Voltage: < 25 V
• Max. total current per connector, depending on the LED circuit board: 10 A
• Current capacity, max. per Pin
  2 pole: 5 A
  4 pole: 5 A / 1,67 A
• Ambient temperature, operation: -30 bis +70°C
• Based on IEC 60838-2-2
• Cross section: AWG 22
• Insulation material: PBT GF
• Inflammability class acc. to Ul94: V0